- April 2021
- March 2021
- February 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- February 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- July 2018
- June 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- January 2013
- December 2012
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- July 2011
- June 2011
- April 2011
- March 2011
- January 2011
- January 2010
Please follow & like us :)
Tag Archives: intermittent
If solar net energy return is as high as some solar advocates claim, why does solar need any subsidies? And not just U.S. subsidies, it’s subsidies on top of subsidies when you add in that we’re buying Chinese government subsidized … Continue reading
[ The highest wind states are getting to be enormously dependent on natural gas to balance wind and solar as this EIA article about California below shows. Yet conventional natural gas has peaked — half our natural gas– and is … Continue reading
2 articles below, Pedro Prieto and National Renewable Energy Laboratory: Jan 14, 2015 Pedro Prieto [energyresources] Digest Number 8957 [altered slightly] In Spain we have this mix, as of the end of 2014: INSTALLED POWER MW % GWH … Continue reading
Why oil is so hard to replace
1) How much fossil fuel energy is burned?
In 2013, the United States burned 96.5 quads (96.5 quadrillion BTU’s) of energy a year, 84% was fossil fuels: 36 petroleum, 26 natural gas, 18.5 coal. In 2013, the United States generated about 4,058 billion kilowatt hours of electricity, 67% from fossil fuels (coal 39%, natural gas 27%, and petroleum 1%), 19% nuclear, and 7% hydropower.
Renewables are a tiny fraction of that, with biomass at 1.48%, geothermal 0.41%, solar 0.23%, wind 4.13%. At the rate they’re growing, it would take thousands of years to replace fossils, which since 2013 have continued to grow in overall energy production far more than renewables.
Electricity is just 15% of our energy use.
So using wind and solar to replace the 67% of electricity from fossil fuels doesn’t make even a tiny dent in the way the other 85% of energy is used which comes from fossil fuels, for essentials such as transportation, manufacturing, and heating.
2) This is a liquid fuel crisis because nearly all FREIGHT transportation runs on oil, mainly diesel.
I like to fly and drive cars, but they don’t plant, harvest, and deliver food — tractors, harvesters, and trucks do that. We might not like it, but we can live without cars and airplanes. But not without trucks, railroads, and ships.
These billions of diesel-engine-powered vehicles and equipment represent trillions of dollars of investment with lifespans of 20 to 40 years, so you can’t just wave a magic wand and instantly replace them, and their billions of tons of steel, copper, aluminum, and so on, which also require energy.
Diesel is available at over 160,000 service stations in the U.S. alone. Whatever you think a “something else” might be, that’s a huge distribution system that also has to be replaced.
3) We can’t electrify the transportation that matters most: medium and heavy trucks, tractors and harvesters, ships, mining equipment, etc.
Batteries and fuel cells aren’t energy carriers – they store the electrical energy generated mainly by non-renewable natural gas and coal.
Diesel & gasoline (46 MJ/kg) have up to 92 times the energy density of a lithium battery and 271 times the energy density of a lead-acid battery.
A truck can’t move even an inch with a battery 92 to 271 times the size and weight of its current diesel-fuel containing tank.
The maximum possible energy density, according to laws of physics and thermodynamics, of a perfect battery is 3 MJ/kg, which is still 15.3 times less than diesel, so you’d still need a “gas” tank 15.3 times larger. I explain in “Who Killed the Electric Car” why it’s unlikely such a battery will ever be developed.
And the lifespan of batteries isn’t nearly as long as diesel engines.
Read all about it in “Diesel is finite. Trucks are the bedrock of civilization. So where are the battery electric trucks?” and the related article links within.
4) Scale. World-wide, we burn 1 cubic mile of oil a year. Here’s what you’d need to do to replace that energy
Allowing fifty years to develop the requisite capacity, 1 Cubic Mile of energy per year could be produced by any one of these developments (source Joules, BTUs, Quads-Let’s Call the Whole Thing Off – IEEE Spectrum):
- 4 Three Gorges Dams,constructed every year for 50 years (18 gigawatts each), or
- 52 nuclear power plants, constructed every year for 50 years (1.1 gigawatts, such as the Diablo Canyon Power Plant), or
- 104 coal-fired power plants,developed each year for 50 years (500 MegaWatts), or
- 32,850 wind turbines, developed each year for 50 years (large turbines with 70-100 meter blade span, rated at 1.65 MW, i.e. General Electric Wind Turbines), or
- 91,250,000 rooftop solar photovoltaic panels developed each year for 50 years (a typical 2.1 kW panel)
5) Energy Density
Oil is a butter fried steak wrapped in bacon. Solar, Wind, and most other alternative energy resources are lettuce. You’d get all of your 2,000 calories a day from one and a quarter pounds of bacon-wrapped steak, versus 31 pounds of lettuce.
Oil is second only to uranium in energy density. This is because a gallon of gas comes from 100 tons of prehistoric plant matter (40 acres of wheat), condensed like moonshine over millions of years into the densest form of solar energy on the planet. If you look at just the gasoline consumed every year in America, 131 billion gallons, that’s equal to 25 quadrillion pounds of prehistoric biomass.
6) Fossil fuels not only provide the energy to make goods, they are also physically used as a feedstock in over 500,000 products — the basis of the petrochemical industry
Here are just a few: Medicines, Ink, Hand lotion, Nail polish, Heart valves, Toothbrushes, Dashboards, Crayons, Toothpaste, Luggage, Parachutes, Guitar strings, DVDs, Enamel, Movie film, Balloons, Antiseptics, Paint brushes, Purses, Sunglasses, Footballs, Deodorant, Glue, Dyes, Pantyhose, Artificial limbs, Oil filters, Ballpoint pens, Skis, Pajamas, Golf balls, Perfumes, Cassettes, Contact lenses, Shoe polish, Fishing rods, Dice, Fertilizers, Electrical tape, Trash bags, Insecticides, Floor wax, Shampoo, Cold cream, Tires, Cameras, Detergents
7) If you wanted to invent an ideal energy source, you’d make oil
Oil has extremely high energy density, and is the most convenient form of energy ever discovered. As a liquid, it’s easily stored, transported, and used. It’s wonderfully combustible, but with a high enough flashpoint that it doesn’t explode easily.
Oil is a liquid, easily transported in pipelines (by far the least energy to move versus rail, truck, or ship). It takes very little time to pour gas or diesel into a vehicle gas tank. Compared to natural gas or hydrogen, petroleum takes up very little space.
Solids like wood, coal, oil shale, and biomass can’t be put into a pipeline (the cheapest way to move energy), and it takes energy to convert them to a liquid fuel. They’re less convenient to transport than a liquid or gas.
Gases take up so much space, you need to compress or liquefy them, and that takes both energy and time.
Energy from wind or solar can’t easily be transported, first you have to build apparatus to harness the wind or sun, then you have to convert the energy to something that can travel, such as electricity, which requires an expensive electric grid.
8) Alternative energy resources are dependent on fossil fuels from start to finish and beyond to operations & maintenance
For example, consider a windmill. A windmill farm in the Escalante desert, built to produce 5.55 TWh of power, would require 13.8 million pounds of aluminum, 2.8 trillion pounds of concrete, 639 billion pounds of steel, etc. The wind farm would occupy over 189 square miles. In 1992 dollars such a wind farm would cost $200 million, which doesn’t include labor, future operational, and maintenance costs, and would serve less than 1% of the United States population (Pacca).
After fossil fuels are gone, the windmills must be able to generate enough energy to maintain themselves and reproduce new windmills, including all of the equipment and tools used to mine the metal and concrete, forge metal into blades and towers, the energy needed to deliver 8,000 parts from all over the globe by ship, rail, or truck and build/maintain all ships, railroads, and trucks (which corrode/rust and need replacement every 6 (trucks) to 29 (ships) years, and the roads the trucks drive on to deliver the windmills to be delivered to their sites. Windmill energy must also provide the energy to build and maintain the electric grid and storage infrastructure, and all of the workers involved in the process from birth, to school, to the vehicles they arrive at work in 18+ years later. Any extra energy generated beyond these needs can now be used to run the rest civilization.
9) At the heart of our dilemma is the fact that Oil is the MASTER RESOURCE that UNLOCKS ALL OTHER RESOURCES.
Nothing is impossible if you have oil:
- As long as you have oil, you have fresh water, because you can drill down and pump it up from 500 feet below or desalinate it
- As long as you have oil, you can go to the most distant parts of the ocean to find the last schools of fish with sonar and spotting planes.
- As long as there is oil, even ore with a very low percent of metal can still be used to get metals to make stuff with, such as alternative energy contraptions
- Food is grown with oil-based pesticides, planted, harvested, distributed, packaged, cooked, and so on with fossil fuels.
- When oil declines, where will we get the energy to do phenomenal things like moving The Tallest structure ever moved by Mankind?
10) TIME. We’re running out of it.
The Department of Energy paid Robert Hirsch to do a Peak Oil study in 2005. Hirsch concluded you’d want to start at least 10, or better yet, 20 years ahead of time before peak oil to prepare for the transition to other energy resources.
Conventional oil peaked world-wide in 2005 (Kerr 2011, Murray, IEA World Energy Outlook 2010) and we’ve been on a plateau ever since then. We don’t have 10 or 20 years. Unconventional oil is nasty, heavy, difficult and very expensive to get at and has a very slow rate of flow — very soon (between now and 2025) it will not be able to make up for the decline rate of conventional oil.
11) Why we can NOT substitute natural gas, liquefied coal, tar sands oil, and other liquid fuels for diesel
Not enough Natural Gas to use for Transportation
The National Resource Council noted that we don’t have enough natural-gas to use as a feedstock for transportation-fuel production. So we’d have to import it and we don’t have the infrastructure to do that or distribute it. We also increasingly are using natural gas for electricity production and to keep the grid from blowing up from intermittent alternative energy like wind and solar with NGCC plants. Natural Gas vehicles aren’t a solution — there aren’t enough fueling stations, and the tanks take up most of the trunk space, their range is at best 100-150 miles, and the public thinks of natural gas as too explosive.
Local truck fleets can use CNG and LNG or diesel made with GTL, but there just isn’t enough natural gas in the USA for this to last very long – the fracking boom is temporary. So it doesn’t make much sense to build fleets of trucks that can use CNG at a time when supplies are about to end, and NG is also needed to generate electricity and balance wind and solar power. CNG/LNG aren’t likely to be added to over 100,000 gas stations either.
Coal-to-liquids would use half the energy contained in the coal to make it and require doubling of coal production. If Carbon sequestration were used, then another 40% of the energy would be used. Oh, and we’re at peak coal too, certainly energy-wise – we’ve used most of the easy, high-energy coal. More research needs to be done to determine exactly what the reserves are now though, since it hasn’t been done since 1974. But the few studies done since then have found less reserves, not more in the areas studied.
Dimethyl ether (DME) has about half the energy content of diesel fuel, so a truck will have to carry about twice the amount of DME for a given range – a penalty that’s worse than CNG and LNG. Two gallons of DME weigh 11 pounds compared to diesel’s 7.5 pounds, so a DME-fueled truck or tractor will be heavier than a diesel-fueled truck, and is better suited to local than long-haul distances. Diesel engines need a special injection system and different cylinder heads to handle the high fuel flow of DME, and steel fuel tanks to store it aboard a truck. The refining process from natural gas to DME may have too high an EROEI as well. As with other gas-to-liquids processes, the first step is conversion to syngas, a mixture of hydrogen, carbon monoxide, and carbon dioxide. This syngas is then synthesized into methanol. Finally, DME is produced through a methanol dehydration reaction.The primary challenge facing the use of DME is the lack of an infrastructure for distribution. Other disadvantages include low viscosity, poor lubricity, a propensity to swell rubber and cause leaks, and lower heating value compared with conventional diesel (NAS 2009). DME costs twice as much to make as methanol, an intermediate product in the methane-to-DME refining process, and is also more expensive to make than diesel fuel, so refiners prefer to sell methanol. DME is mainly used as aerosol propellant to replace chloroflurocarbons in paints and cosmetics. World-wide production of DME in the world is less than 150,000 tons per year.
12) Economic, political, social obstacles
Can we really afford to spend trillions on new vehicles and renewable energy and fix our broken infrastructure, and pay for medicare, social security, and so on?
How much energy will be needed to fight wars to keep the oil flowing?
There’s a lot of social opposition to building new dams, LNG facilities, wind turbines, and so on.
Alternative Energy Sources
In the news:
1) Renewables are INTERMITTENT and UNRELIABLE
Renewables are far worse off than fossil fuels and even wood when it comes to another crucial energy quality: continuity of supply. A coal-fired power plant can be cranked up as needed; not so sun or wind.
Coal-fired, gas-fired, or nuclear power plants operate 75% to 90% of the time. But wind turbines typically operate between 20 and 35% of the time. The sun is always unavailable half the time, plus whenever there’s cloud cover.
Often wind power or solar power is generated when it is least needed, wind power at night, and solar power much less in the winter when there’s both less sunshine and the angle of the sun generate less power.
Worse yet, building wind and solar doesn’t mean you can get rid of coal, natural gas, or nuclear power plants at all. In fact, often utilities have to build natural gas combined cycle plants to quickly kick in to make up for the power lost when the wind stops blowing or the sun stops shining.
Wind and solar make the grid LESS RELIABLE:
“Within minutes of wind or solar disappearing, a thousand megawatts of electricity — the output of a nuclear reactor — can disappear and threaten stability of the grid. To avoid that calamity, fossil fuel plants have to be ready to generate electricity in mere seconds. That requires turbines to be hot and spinning, but not producing much electricity until complex data networks detect a sudden drop in the output of renewables. Then, computerized switches are thrown and the turbines roar to life, delivering power just in time to avoid potential blackouts. The state’s electricity system can handle the fluctuations from existing renewable output, but by 2020 vast wind and solar complexes will sprawl across the state, and the problem will become more severe.”
Renewable energy adds unprecedented levels of stress to a grid designed for the previous century. Green energy is the least predictable kind. “The grid was not built for renewables,” said Trieu Mai, senior analyst at the National Renewable Energy Laboratory. The role of the grid is to keep the supply of power steady and predictable. Engineers carefully calibrate how much juice to feed into the system as everything from porch lights to factory machines are switched on and off. The balancing requires painstaking precision. A momentary overload can crash the system (Halper).
Engineers haven’t yet developed energy storage devices suitable for storing solar and wind power, and they would add to the ultimate cost.
Many of the windiest and sunny regions in the world are virtually uninhabited, so electricity would have to be moved long distances to cities. The same patchiness holds for other renewables, from geothermal to hydro energy. For biomass, everyone has some arable land for growing energy crops, but much of it is already spoken for. And even if the land were available, energy crop yields would fall short of the need.
Check out this post by Roger Andrews, Renewable Energy Growth in Perspective, which shows how insignificant wind and solar are in the amount of overall energy used by society (and hydro and geothermal as well).
The “sobering reality,” Smil says, is that there is only one renewable—solar energy—that could by itself meet future energy demands. Wind power could conceivably make a significant contribution, but the rest—hydro, biomass, ocean waves, geothermal, ocean currents, and ocean thermal differences—would provide just one-tenth to one-ten-thousandth of today’s energy output from fossil fuels. So the bulk of the burden will fall on solar, but turning the sun’s rays into useful energy has a long way to go, Smil notes. Today, photovoltaic electricity accounts for less than 0.1% of the world’s electricity. Solar heating, such as solar water heaters, accounts for less than 0.1% of total global energy production. Such numbers would have to grow rapidly for a long time to make a difference, but renewables’ handicaps do not bode well for speeding up the next energy transition. Fossil fuels “were phenomenally attractive,” yet it still took 50 to 70 years to bring them into widespread use, says IIASA’s Grübler. That’s because, no matter how attractive a fuel might be, it takes time to create the infrastructure for extracting and transporting the resource, converting it into a usable form, and conveying it to the end user. It also takes time for inventors to develop enduse technologies—such as steam engines, internal combustion engines, and gas turbines—and for consumers to adopt them and create demand. Renewables “will be slower because they’re less attractive,” says Grübler. “They don’t offer new services; they just cost more.” (Kerr)
4) Dependence on other stuff
You have to build windmills to harness wind, solar plants to harness solar power. These apparatus need all kinds of materials depleting faster than even oil, coal, and natural gas. There isn’t a single object or step that doesn’t have fossil fuel inputs – ore is mined with ore trucks, crushed to extract the ore, smelted, fabricated, delivered.
5) Environmental Impact
Biofuels deplete topsoil and aquifers, nuclear energy plants can melt down and there’s nowhere to put the waste, dams displace people, mining the metals for wind and solar PV harm the environment, and so on. Dams emit a lot of carbon dioxide during construction from the massive use of cement, methane is released from drowned plants, habitat is destroyed, water quality changes, gravel and sand are trapped behind the dam walls, affecting beaches, estuaries, and rivers downstream, prevent salmon from spawning, and so on. Any kind of reactor that uses water to cool down with (coal, nuclear) heats the water which can harm the habitat.
6) Is the resource renewable?
What’s the point in replacing fossil fuels with something temporary? We want something sustainable that will last forever. Wind and sunlight are renewable, but the equipment to capture the wind and sunshine are not renewable, because the equipment requires non-renewable metals, minerals, and significant amounts of non-renewable oil, coal, and natural gas to make.
Wood is renewable, but only if not too much is harvested. John Perlin documents many civilizations that fell because they harvested too much wood in his wonderful book “A Forest Journey: The Role of Wood in the Development of Civilization”
7) Scale — see #3 above – there is nothing we could build that would replace a cubic mile of oil every year
8) Is the resource close enough to get?
We’ve built millions of miles of natural gas pipelines at over a million dollars per mile. There are a lot of natural gas reservoirs we’d love to exploit, but it would cost too much to run pipelines to them, more than what the natural gas could be sold for.
Most of our wind is in Montana, North Dakota, and South Dakota, far from the big cities where people live. The cost of harvesting wind in these states and building up the electric grid to deliver the electricity is simply too much money, plus 10% of the electricity is lost as it travels such long distances. And as we heat up from climate change, the risk of the wires starting forest fires grows.
Solar power is best in the far Southwest, again, far from the main population centers (except for southern California and Arizona).
Most of the power from the ocean (Wave, Tide, Ocean Current, OTEC) or rivers is too far to hook up to the electric power grid (and vulnerable to corrosion, hurricanes, large waves, bio-fouling, high capital costs, etc).
9) Energy Density (also see #4 above)
Weight density. An electric battery typically is able to store and deliver only about 0.1 to 0.5 MJ/kg, and this is why electric batteries are problematic in transport applications: they are very heavy in relation to their energy output. Thus electric cars tend to have limited driving ranges.
Volume (or Volumetric) Density This refers to the amount of energy that can be derived from a given volume unit of an energy resource (e.g., MJ per liter). Obviously, gaseous fuels will tend to have lower volumetric energy density than solid or liquid fuels. Natural gas has about .035 MJ per liter at sea level atmospheric pressure, and 6.2 MJ/l when pressurized to 200 atmospheres. Oil, though, can deliver about 37 MJ/l. In most instances, weight density is more important than volume density; however, for certain applications the latter can be decisive. For example, fueling airliners with hydrogen, which has high energy density by weight, would be problematic because it is a highly diffuse gas at common temperatures and surface atmospheric pressure; indeed a hydrogen airliner would require very large tanks even if the hydrogen were super-cooled and highly pressurized.
The greater ease of transporting a fuel of higher volume density is reflected in the fact that oil moved by tanker is traded globally in large quantities, while the global tanker trade in natural gas is relatively small. Consumers and producers are willing to pay a premium for energy resources of higher volumetric density.
Area density This expresses how much energy can be obtained from a given land area (e.g., an acre) when the energy resource is in its original state. For example, the area energy density of wood as it grows in a forest is roughly 1 to 5 million MJ per acre. Area energy density matters because energy sources that are already highly concentrated in their original form generally require less investment and effort to be put to use.
If the energy content of the resource is spread out, then it costs more to obtain the energy, because a firm has to use highly mobile extraction capital [machinery], which must be smaller and so cannot enjoy increasing returns to scale. If the energy is concentrated, then it costs less to obtain because a firm can use larger-scale immobile capital that can capture increasing returns to scale. Thus energy producers will be willing to pay an extra premium for energy resources that have high area density, such as oil that will be refined into gasoline, over ones that are more widely dispersed, such as corn that is meant to be made into ethanol.
10) High Energy Returned on Energy Invested
At the start of the oil age, the net energy — the amount produced versus how much energy was used to produce it was 100:1.
That left 99 other units of energy to build houses, roads, bridges, airports, railroads, schools, hospitals, drinking water and sewage treatment plants, chemicals, amusement parks, drive across the country, heat and cool structures, build millions of electronic gadgets, toys, and so on.
Charles A. S. Hall estimates you’d need an EROEI of at least 12 to 13:1 to run civilization as we know it.
Solar PV has an EROEI of only 2.45 in sunny Spain, and somewhere between 1.6 and 2 in Germany.
Richard Heinberg defines EROEI as
- The amount of useful energy that’s left over after the amount of energy invested to drill, pipe, refine, or build infrastructure (including solar panels, wind turbines, dams, nuclear reactors, or drilling rigs) has been subtracted from the total amount of energy produced from a given source.
- If 10 units of energy are “invested” to develop additional energy sources, then one hopes for 20 units or 50 or 100 units to result.
- “Energy out” must exceed “energy in,” by as much as possible. Net energy is what’s left over that can be employed to actually do further work. It can be thought of as the “profit” from the investment of energy resources in seeking new energy.
- The net energy concept bears an obvious resemblance to a concept familiar to every economist or businessperson—return on investment, or ROI. Every investor knows that it takes money to make money; every business manager is keenly aware of the importance of maintaining a positive ROI; and every venture capitalist appreciates the potential profitability of a venture with a high ROI. Maintaining a positive energy return on energy invested (EROEI) is just as important for energy producers, and for society as a whole.
- The transition to alternative energy sources must be negotiated while there is still sufficient net energy available to continue powering society while at the same time providing energy for the transition process itself.
Heinberg prefers EROEI over EROI because the latter might lead readers to think it means energy returned on money invested. Money is meaningless, an abstract concept to grease the wheels of commerce, not something you can put in your gas tank and drive on. It’s best to leave money out of net energy (EROEI) considerations. I don’t use EROEI as much as I’d like to because people just don’t get it, and change the discussion, or reply with objections in terms of money, which they’re more familiar with.
I also despair of discussions about EROEI, because corporate scientists who always publish in non-peer-reviewed journals easily fool the public by setting the boundaries too narrowly. For instance, researchers who found ethanol production to have a positive EROEI above 1:1 only considered the energy used at the ethanol refinery. They left out the energy to make tractors, the energy to plant, fertilize, harvest, and deliver the corn to the ethanol plant, and trucks and trains delivering the ethanol after it’s been made (it can’t go in a pipeline).
Another problem is that the EROEI of each wind or solar plant will vary depending on how old it is, where it is, and so on.
Back when we depended on wood before coal, and grew all of our food, it took 90% of the population to produce enough food to feed themselves and another 10% of town folk who were merchants, artists, soldiers, or gentry. Even as recently as 1850 over 65% of work done was muscle-powered, versus only 1% today now that machines do most of the work. Just 1 liter of oil is equal to a person working two weeks of 10-hour days (Pimentel).
11) Electricity doesn’t solve our problems
Smelting requires coal. Not electricity. Large vehicles will never be able to run on (electric) batteries or fuel cells. They’re too heavy, and the laws of physics mean that per unit weight, they can only carry a small fraction of the energy the same weight of energy-dense oil can:
“Today’s lead acid batteries can store about 0.1 mega-joules per kilogram: 500 times less than crude oil (50 MJ/k). Lithium ion batteries are able to deliver .5 mega-joules per kilogram: 100 times less than oil. The theoretical maximum a battery could ever deliver is 5 mega-joules per kilogram, 10 times less energy than oil”, according to Kurt Zenz House, Chief Executive of C12 Energy.
Who cares about cars? Since the billions of diesel engines that do all of the work of society that keeps us alive — tractors, harvesters, trucks, trains, and ships can’t be converted to run on electricity, we’re back to the age of wood again, and 2 billion people or less on the planet.
12) Scaling up is hard to do
No matter what the technology, bringing something that works in the lab to commercial scale is hard to do. See Lester et al., (2015) “Closing the Energy-Demonstration Gap” from Issues in Science and Technology, Volume XXXI Issue 2 for details
13) Renewables are Expensive!
FYI, here are the so-called Leveraged Cost of Energy figures of various electricity generating sources:
Table 1b. Estimated LCOE (simple a verage of regional values) for new generation resources, for plants entering service in 2022 Source: EIA. August 2016. Levelized Cost and Levelized Avoided Cost of New Generation Resources in the Annual Energy Outlook 2016. Energy Information Administration.
I have several problems with the numbers in Table 1b above
The cost of wind and solar may seem cheap, but:
- Power that’s dependable and available whenever you want it around the clock if need be (high capacity factor) is more valuable than intermittent, unpredictable, variable power like wind and solar. The EIA doesn’t consider hydropower dispatchable because it varies seasonally and is often not available since it’s being held back for agriculture, drinking water, and maintaining a healthy ecology, especially for the fishing industry.
- Wind and solar power DEPEND on backup power, from mostly natural gas (because coal and nuclear don’t ramp up and down quickly enough) to keep the electric grid in exact balance between supply and demand.
- Some fraction of the LCOE for fossil and nuclear plants and energy storage should be added to the LCOE costs of wind and solar since they can’t exist on their own.
- Subsidies make renewable costs look better than they are. Tax credits in 2022 will be LOWER than what they are now, so the actual LCOE figures with subsidies NOW are HIGHER than in the future
The table has higher capacities than reality that make renewables sound better than they are:
- Hydropower capacity is 37.3%, not 58%.
- Wind capacity is 33%, not 40%, and since most of the best wind is already built out in most states, it is likely wind capacity will go DOWN in the future.
- Geothermal is 73.1 not 91
- Biomass is 56.1 not 83
- The above are from EIA Table 6.7.B. Capacity Factors for Utility Scale Generators Not Primarily Using Fossil Fuels
Natural gas production is expected to peak in 2020, yet huge amounts of coal and nuclear plants have already retired or will over the next 20 years, which accelerates depletion even faster. Coal plants can’t come back because we are 1) past peak coal, 2) Carbon Capture and Storage (CCS) technology is far from commercial and 3) uses far too much energy to ever be commercial, about 40% of the power generated.
- David Fridley, LBNL scientist
- No single or combination of alternative energy resources can replace fossil fuels
- Wind & Solar need thousands of tons of steel, aluminum, cement, concrete, copper but produce little energy
- High-Tech can’t last: Limited minerals & metals essential for wind, solar, microchips, cars, & other high-tech gadgets
- Alternative Energy Reading List
- Heinberg, Richard. September 2009. Searching for a Miracle. “Net Energy” Limits & the Fate of Industrial Society. Post Carbon Instutite. Heinberg concludes there will be no combination of alternative energy solutions that might enable the long term continuation of economic growth, or of industrial societies in their present form and scale.
Issues by type of Alternative Energy Resource
Also go to the energy and books sections of energyskeptic to get more detailed information on specific kinds of energy.
The only hope to replace the problem we face — the need for liquid transportation fuels — would be biomass converted to diesel. We don’t have enough biomass to do this. Even if you burned every single plant in America, including their roots – which is much more energy producing than converting all of this biomass to liquid fuels, you would still produce less energy than we burn in a year, and you’d be left with a barren moonscape.
Biofuels have a low EROEI (possibly negative in fact), and are tremendously ecologically destructive — they deplete topsoil, aquifers, are the 3rd major source of carbon dioxide from cutting down rainforests to grow palm oil, runoff of fertilizer to grow biomass creates vast dead zones in waterways, make food prices far more expensive as corn is diverted to make fuel instead, and much more (see “Peak Soil“).
Most forms of alternative energy create electricity, which doesn’t solve the main problem, the need for LIQUID TRANSPORTATION FUELS. There are enormous issues with the electric grid which wind, solar, and other kinds of generated electricity travel over
The best books and articles to understand in detail the problems with the various kinds of energy are:
- Martin Hoffert, et al 2002 Advanced Technology Paths to Global Climate Stability: Energy for a Greenhouse Planet, Vol 298
- Howard Hayden. 2005. The Solar Fraud: Why Solar Energy Won’t Run the World. Second Edition.
- Ted Trainer. 2010. Renewable Energy Cannot Sustain a Consumer Society.
Bucknell III, Howard. 1981. Energy and the National Defense. University of Kentucky Press.
Frumkin, H. Energy and Public Health: The Challenge of Peak Petroleum. http://www.ncbi.nlm.nih.gov/pmc/articles/PMC2602925/
Hall, C.A.S., R. Powers and W. Schoenberg. 2008. Peak oil, EROI, investments and the economy in an uncertain future. in Pimentel, David. (ed). Renewable Energy Systems: Environmental and Energetic Issues. Elsevier London
Halper, E. Dec 2, 2013.Power struggle: Green energy versus a grid that’s not ready. Minders of a fragile national power grid say the rush to renewable energy might actually make it harder to keep the lights on. Los Angeles Times.
Huber, Peter. Nov 27, 2006. Love Uranium. Forbes.
IEA World Energy Outlook 2010 (world oil peaked in 2006).
Kerr, Richard. 13 Aug 2010. Do We Have the Energy For the Next Transition? Past energy transitions to inherently attractive fossil fuels took half a century; moving the world to cleaner fuels could be harder and slower. Science Vol 329.
Kerr, Richard. 25 March 2011. Peak Oil May Already Be Here. Science Vol. 331 no. 6024 pp. 1510-1511
Murray, J., and King, D. 26 January 2012. Oil’s tipping point has passed. Nature, Vol 481 pp 43-4
NAS 2009. America’s Energy Future: Technology and Transformation. 2009. National Academy of Sciences, National Research Council, National Academy of Engineering.
NAS 2010. Hidden Costs of Energy: Unpriced Consequences of Energy Production and Use. 2010. Committee on Health, Environmental, and Other External Costs and Benefits of Energy Production and Consumption; National Research Council
NAS 2013. Transitions to Alternative Vehicles and Fuels Committee on Transitions to Alternative Vehicles and Fuels; Board on Energy and Environmental Systems; Division on Engineering and Physical Sciences; National Research Council
Pacca, S. et al. July 15, 2002. Greenhouse Gas Emissions from Building & Operating Electric Power Plants. Environ Sci Technology 36(14):3194-200.
Pimentel, David et al. 2008. Food, Energy and Society,Third Edition.